Upholstery Supplies for the
Upholstery Industry.
Marine Supplies for Marine
Fabricators.

Great Lakes Fabrics, Inc.
1904 S. Wenona St.
Bay City,  Michigan 48706
1.800.652.2358 - Toll Free
989. 893.5875 - Fax
989. 893.3311 - Local
Hours- Mon. - Fri.
8:00am to 5:30pm E.T.

Upholstery Supplies
Supply Catalog

Page Index:  Fabric Protector Spray, Fasteners, Foam, Foam Saw
and Furniture Covers
 

[A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z]
[Buttons]   [Cotton]   [Dacron]   [Foam]   [Staples]    [Thread]   [Tools]   [Welt Cord]   [Zipper]

F

Great Lakes Fabrics Great Lakes Fabrics Great Lakes Fabrics upholstery supplies upholstery supplies upholstery supplies upholstery supplies upholstery supplies

Fabric Protector


Water Repellent

Protects all fabrics from  both water and oil based staining agents, and other  pollutants. Recommended for use on most fabrics. Formula is non-solvent, and non-silicon based.
32 ounce bottle has approx. 39 square foot coverage.
1 gallon bottle has approx. 150 square foot coverage.
 

Part Number
 #1593

  

Cost
32 ounce Each $ 40.80 Retail

#1594

  

One Gallon Each $ 69.30 Retail
     

AQUA-TITE GREEN contains no silicone and is a premium grade heavy duty water repellent solution. It restores the water repellency of cotton and synthetic fabrics. Can be used on flame resistant fabrics without affecting the flame resistant properties. May darken light colors fabrics. Can be used on acrylic, cotton, nylon, polyester or any of the aforementioned blends.  Can also be used on garments, sporting goods, tents, awnings, boat covers, leather and canvas fabrics. Aqua-Tite Green has a VOC (volatile organic compounds) level of 5% which is well below all current regulatory VOC restrictions. One gallon covers 500 to 700 square feet. Quart covers 125 to 175 square feet. Quarts come with an easy spray trigger.
Part Number
#637
#638
#639
#640		  

Cost
Each Quart $ 36.20 Retail
Case of 12 - Quarts $ 394.80 Retail
Each - Plastic Gallon $ 82.50 Retail
Case of 6 - Plastic Gallon $ 450.00 Retail

 


ForceField® Products
 Fabric Protector. 22 ounce.

This product is great for home, auto, boat and RV's. Polymer technology will retard soiling as well as all liquid stains.
(Even oil based.)

  • Professional strength.

  • Safe on all fabrics. Including silk and suede.

  • Repels water and oil based spills and stains.

  • Will not change the odor, feel or color of the fabric.

  • Restores stain repellency to older or cleaned fabrics.
Part Number
 #1600		   Cost
 Per Each $ 28.00 Retail

Order Form

FASTENERS

COLORED CAPS - All brass/nickel construction.
 
AQUAMARINE  
#1015 Each $ 0.66 Retail
#1016 Per 100 $ 29.70 Retail
BEIGE  
#1578 Each $ 0.66 Retail
#1579 Per 100 $ 29.70 Retail
   
BLACK  
#206 Each $ 0.66 Retail
#207 Per 100 $ 29.70 Retail
BLUE  
#900 Each $ 0.66 Retail
#901 Per 100 $ 29.70 Retail
   
BROWN  
#902 Each $ 0.66 Retail
#903 Per 100 $ 29.70 Retail
BURGUNDY  
#904 Each $ 0.66 Retail
#905 Per 100 $ 29.70 Retail
   
CHARCOAL GRAY  
#906 Each $ 0.66 Retail
#907 Per 100 $ 29.70 Retail
FOREST GREEN  
#908 Each $ 0.66 Retail
#909 Per 100 $ 29.70 Retail
   
GRAY  
#910 Each $ 0.66 Retail
#911 Per 100 $ 29.70 Retail
NAVY  
#912 Each $ 0.66 Retail
#913 Per 100 $ 29.70 Retail
   
TEAL  
#1004 Each $ 0.66 Retail
#1022 Per 100 $ 29.70 Retail
WHITE  
#1353 Each $ 0.66 Retail
#1354 Per 100 $ 29.70 Retail

 

STANDARD FASTENERS - All brass/nickel construction.
Will NOT rust.
 

PART A - ROUND CAP Standard 1/4" brass-style post.
Part Number
#208
#209		 Cost
 Each $ 0.40 Retail
 Per 100 $ 19.70 Retail
   

PART A - ROUND CAP with stainless steel-style post.

#914
#915		 Cost
 Each $ 0.50 Retail
 Per 100 $ 26.00 Retail
   

PART A - ROUND CAP with longer length post. (5/16")
Part Number
#916
#917
Each $ 0.46 Retail
 Per 100 $ 24.50 Retail
   

GYPSY STUDS - For fastening two separate pieces of canvas onto a screw stud. (piggy-back style).
Part Number
#835
#836		 Cost
 Each $ 0.78 Retail
 Per 100 $ 36.40 Retail
   

PART B - SOCKET (Normal action)
Part Number
#210
#211		 Cost
 Each $ 0.36 Retail
 Per 100 $ 17.30 Retail
   

PART B - SOCKET (Hard action)
Part Number
#918
#919		 Cost
 Each $ 0.42 Retail
 Per 100 $ 21.40 Retail
   

PART C - STUD
Part Number
#212
#213		 Cost
 Each $ 0.26 Retail
 Per 100 $ 13.60 Retail
   

PART C - FLANGELESS STUD
Part Number
#634
#635		 Cost
 Each $ 0.30 Retail
 Per 100 $ 15.80 Retail
   

PART D - EYELET  Standard 1/4" Post
Part Number
#214
#215		 Cost
 Each $ 0.24 Retail
 Per 100 $ 13.10 Retail
   

PART D - EYELET Long 5/16" Post
Part Number
#692
#693		 Cost
 Each $ 0.34 Retail
 Per 100 $ 16.00 Retail
   

Order Form

DOT BRAND - All brass/nickel construction. Will NOT rust.

 

PART A - DOT ROUND CAP  Standard 1/4" brass-style post.
Part Number
#216
#217		 Cost
 Each $ 0.60 Retail
 Per 100 $ 31.00 Retail
   

PART B - DOT SOCKET  (Normal Action)
Part Number
#218
#219		 Cost
 Each $ 0.50 Retail
 Per 100 $ 26.30 Retail
   

PART C - DOT STUD
Part Number
#220
#221		 Cost
 Each $ 0.34 Retail
Per 100 $ 18.90 Retail
   

PART D - DOT EYELET  Standard 1/4" Post
Part Number
#222
#223		 Cost
 Each $ 0.34 Retail
 Per 100 $ 17.80 Retail

 

SCREW STUDS - All nickel/stainless steel construction. For boats and automobiles. Will NOT rust.

 

PART E - 3/8" LENGTH - Stainless screw stud.
Part Number
#224
#225		 Cost
 Each $ 1.00 Retail
 Per 100 $ 49.40 Retail
   

PART E - 5/8" LENGTH - Stainless screw stud.
Part Number
#226
#227		 Cost
 Each $ 1.10 Retail
 Per 100 $ 53.10 Retail
   

PART E - 1/2" LENGTH - A stainless steel DRILL POINT screw stud.  Saves pre-drilling time.
Part Number
#228
#229		 Cost
 Each $ 1.24 Retail
 Per 100 $ 61.40 Retail
   

PART E - 5/8" LENGTH - A larger diameter #10 stainless screw stud used for stripped holes.
Part Number
#230
#231		 Cost
 Each $ 1.26 Retail
 Per 100 $ 62.50 Retail

Order Form

ONE WAY FASTENERS - Pull-The-DOT. This type of fastener has a tab built into it, so it only comes off and goes on in one certain spot. Made for a strong, secure hold.
Pull-The-DOT is a trademark of the Scovill Corp.
 

PART A - ONE WAY CAP - Standard length post.
Part Number
#957
#958		 Cost
 Each $ 0.90 Retail
 Per 100 $ 44.30 Retail
   

PART B - ONE WAY SOCKET
Part Number
#959
#960		 Cost
 Each $ 0.84 Retail
 Per 100 $ 42.00 Retail
   

SCREW STUDS 3/8" - ONE WAY  Stainless steel.
Part Number
#961
#962		 Cost
 Each $ 1.60 Retail
 Per 100 $ 79.50 Retail

Order Form

SNAP-FAST* BRAND - Special style fasteners to replace original equipment. Will NOT rust.
 

PART A - Pronged Metal Cap (Snap-Fast style)
Part Number
#837
#838		 Cost
 Each $ 1.90 Retail
 Per 100 $ 94.40 Retail
   

PART B - Plastic Socket (Snap-Fast style)
Part Number
#839
#840		 Cost
 Each $ 0.66 Retail
 Per 100 $ 34.00 Retail
   

PART C - Plastic Stud WHITE  (Snap-Fast style)  Uses your screw.
Part Number
#841
#842		 Cost
 Each $ 0.84 Retail
 Per 100 $ 42.00 Retail
   

PART C - Plastic Stud BLACK  (Snap-Fast style) Uses your screw.
Part Number
#853
#921		 Cost
 Each $ 0.84 Retail
 Per 100 $ 42.00 Retail

 

TURNBUCKLE STYLE FASTENERS
 

TWO SCREW BASE - DOUBLE  For one or two layers of material. Two screw holes for strength. 7/8" center to center screw holes.
13/16" height. 1 1/4" overall length. 3/8" overall width.
5/8" base tapers to 1/2" pivot crown.
Part Number
#753
#754		 Cost
 Each $ 3.74 Retail
 Per 100 $ 148.90 Retail
   

EYELET FOR TURNBUCKLE - Top part of ring to go on fabric over turnbuckle base.
Part Number
#877
#878		 Cost
 Each $ 0.80 Retail
 Per 100 $ 30.30 Retail
   

WASHER FOR TURNBUCKLE - Washer for underside of fabric. Plain Style.
Part Number
#955
#956		 Cost
 Each $ 0.42 Retail
 Per 100 $ 20.50 Retail
   

WASHER FOR TURNBUCKLE  - Washer for underside of fabric. Slotted Style.
Part Number
#1029
#1030		 Cost
 Each $ 0.66 Retail
 Per 100 $ 29.30 Retail
   

TURNBUCKLE 2 PRONG  - single base.
Part Number
#1595
#1596		 Cost
 Each $ 3.10 Retail
 Per 100 $ 123.95 Retail
   

TURNBUCKLE CLINCH PLATE
Part Number
#1597
#1598		 Cost
 Each $ 0.30 Retail
 Per 100 $ 14.30 Retail

Order Form

CURTAIN FASTENERS
 

SOCKET - CURTAIN FASTENER Standard leg 7/32".
Part Number
#963
#964		 Cost
 Each $ 2.06 Retail
 Per 100 $ 104.00 Retail
   

BACKPLATE - CURTAIN FASTENER
Part Number
#965
#966		 Cost
 Each $ 0.74 Retail
 Per 100 $ 38.00 Retail
   


1/2" STAINLESS STEEL SCREW STUD - CURTAIN FASTENER
Part Number
#1012
#1013		 Cost
 Each $ 2.56 Retail
 Per 100 $ 127.80 Retail

 

SNAP-CAPS
 

Snap Caps are marine grade caps that fit over #6 and #8(metric sizes M3 and M4) screws. Tops are 1/2 inch diameter (actually .52). A wonderful way to cover unsightly screws in visible places. Slide the bottom piece on the screw before insertion, install the screw and snap the cap in place. Protects the screw from rust and corrosion. Comes in a variety of colors! Sold tops and bottoms together by the 100 count.
 


 


Snap-Caps Base


Snap-Caps - White
#1616 Per 100  $ 24.00 Retail

Snap-Caps - Off White
#1617 Per 100  $ 24.00 Retail
   

Snap-Caps - Medium Saddle
#1618 Per 100  $ 24.00 Retail

Snap-Caps - Morning Gray
#1619 Per 100  $ 24.00 Retail
   

Snap-Caps - Chocolate
#1620 Per 100  $ 24.00 Retail

Snap-Caps - Royal Blue
#1621 Per 100  $ 24.00 Retail
   

Snap-Caps - Burgundy
#1622 Per 100  $ 24.00 Retail

Snap-Caps - Black
#1623 Per 100  $ 24.00 Retail

Order Form

CURTAIN TAIL SLIDES
MARINE INTERIOR CURTAIN TAIL SLIDES
 

Plastic sleeve sewn into boat curtain panels.
Knob at top inserted into curtain rod.
Part Number
#393		 Cost
 Per 100  $ 76.00 Retail

 

STAY PUT FASTENER
Ultimate


Stay Put Shock Cord Clip
2.8 inch length

Part Number

  

Cost

#1651

Black - Each  $  6.20 Retail

#1652

White - Each  $  6.20 Retail
   

STAYPUT KNOBS


Uses your screw
 

#550

Black - Each  $  1.50 Retail

#562

White - Each  $  1.50 Retail

 

CARPET FASTENERS


Two part Military Black ring-style fasteners that screw to the floor.
Part Number
#1133		 Cost
 Each $ 3.68 Retail

Order Form

FASTENER TOOLS


Pres 'N Snap Tool - This tool is the most versatile tool for setting snaps and grommets. Ends the need for pre-punching holes before setting snaps. Comes complete with dies for four snap parts as well as dies for the #1 grommets. Replacement parts are in stock.
Part Number
#589		 Cost
 Each $ 285.60 Retail
   
Replacement Dies For Pres 'N Snap Tool:


Part A Cap
Part Number
#590		 Cost
 Each $ 44.70 Retail
   

Part B Socket
Part Number
#591		 Cost
 Each $ 44.70 Retail
   

Part C Stud
Part Number
#592		 Cost
 Each $ 46.60 Retail
   

Part D Eyelet
Part Number
#593		 Cost
 Each $ 44.70 Retail
   
Part Number   Cost
#594 #1 Grommet Die Set
(Top and Bottom)		 Each $ 75.80 Retail
#922 #2 Grommet Die Set
(Top and Bottom)		 Each $ 88.50 Retail
#920 Gypsy Stud Each $ 58.00 Retail
#856 Rubber Retainer for
Parts A and D		 Each $ 4.50 Retail
#886 Rubber O-Ring for Dies Each $ 0.94 Retail

 


Economy Hand-Held Snap Tool - A hand held tool for setting snaps. Used with a hammer to pound the posts down. Bottom part of this tool is plastic. Does Not handle abuse well. A simple, helpful economical tool.
Part Number
#233		 Cost
 Per Set $ 22.80 Retail
   

Premium Hand-Held Snap Tool - A hand held tool for setting snaps. Used with a hammer to pound the posts down. Both parts of this tool are metal. High durability. A simple, helpful economical tool.
Part Number
#879		 Cost
 Per Set $ 55.20 Retail
   

Screw Stud Drill Adapter - Screw stud adapter for phillips head screws. Holds screw stud firmly in place, reduces slips. Eliminates pre-drilling in aluminum or fiberglass when used with our 1/2" stainless self tapping screw stud. Allen wrench and phillips bit included.
Part Number
#232		 Cost
 Three Piece Set $ 102.20 Retail
   

Quick-Fit Canvas Kit - A kit designed to help hold your canvas in place, while you continue fitting and marking out your adjustments. Acts as a third hand, using pins clipped to screw studs already existing on the boat or vehicle. Kit includes 50 sockets and 25 caps. A metal release tool is also included.
Part Number
#843		 Cost
 Per Kit $ 139.40 Retail
   
Replacement Quick Fit Caps:
   
Part Number
#430
#855
#1606
#1607		 Cost
 Black Holding Cap(s) 1 - 99  $ 1.32 Retail
Black Holding Caps 100+ $ 0.80 Retail
Socket(s) (with pins)  1 - 99 $ 3.20 Retail
Sockets (with pins)  100+ $ 2.40 Retail
   
Quick-Fit Release Tool
Part Number
#1599		 Cost
 Each $ 6.50 Retail

Order Form

FOAM


Medium - HD36   A prime quality, high density seating or back foam.
Can be used as a firm bodied base, yet still retains some softness.
 
Part Number

Cost
#270 1"x24"x80" Each Sheet $ 25.20 Retail
#234 2"x24"x80" Each Sheet $ 43.80 Retail
#235 3"x24"x80" Each Sheet $ 75.60 Retail
#236 4"x24"x80" Each Sheet $ 87.60 Retail
#237 4 1/2"x24"x80" Each Sheet $ 111.00 Retail
#238 5"x24"x80" Each Sheet $ 109.50 Retail
#239 6"x24"x80" Each Sheet $ 151.20 Retail

Firm - HD44   A prime quality, high density seating foam.
A great firm foam.
 
Part Number Cost
#240 1/2"x30"x80" Each Sheet $ 19.40 Retail
#241 1"x24"x80" Each Sheet $ 24.20 Retail
#242 2"x24"x80" Each Sheet $ 48.40 Retail
#243 3"x24"x80" Each Sheet $ 72.60 Retail
#244 4"x24"x80" Each Sheet $ 96.80 Retail
#245 5"x24"x80" Each Sheet $ 140.00 Retail


Medium - HR30   A supreme quality, highly resilient foam. Used where
softness and superior quality is desired. Similar in quality to pin-cor style foam.
Also this foam has flame retardant specs.
 
Part Number Cost
#1696 2"x24"x82" Each Sheet $ 61.00 Retail
#1697 3"x24"x82" Each Sheet $ 91.50 Retail
#246 4"x24"x82" Each Sheet $ 184.00 Retail

Poly Foam - A standard quality, semi-firm foam. A good, economically
priced product.  Sheet size is 24" x 80".
 
Part Number Cost
#247 1/2"x24"x80" Each Sheet $ 9.00 Retail
#248 1"x24"x80" Each Sheet $ 20.20 Retail
#249 2"x24"x80" Each Sheet $ 40.40 Retail
#250 3"x24"x80" Each Sheet $ 54.00 Retail
#251 4"x24"x80" Each Sheet $ 80.80 Retail

Super Soft - An excellent soft back foam. High quality.
Sheet size 24" x 82".
 
Part Number Cost
#595 2"x24"x80" Each Sheet $ 50.40 Retail
#252 3"x24"x80" Each Sheet $ 75.60 Retail
#253 4"x24"x80" Each Sheet $ 100.80 Retail


Extra Firm Bonded (Rebond) - A good quality firm foam used on
snowmobile and cycle seats, boats, kneelers and exercise equipment.
Sheet size 24"x72".
 
Part Number Cost
#254 1"x24"x72" Each Sheet $ 43.40 Retail
#255 2"x24"x72" Each Sheet $ 86.80 Retail

We can special order foam in your specific dimensions.

Ask about volume discounts!

Sew Foam - A product made of 1/2" thick Polyurethane foam, with a backing on it, so it flows smoothly through your sewing machine. Used for sewing channels. Roll size 1/2" thick x 60" wide x 20 yds. long.
Part Number
#546
#547		   Cost
 Per Yard $ 19.00 Retail
 Per Roll $ 304.00 Retail
     
Sew Foam - A product made of 1/4" thick Polyurethane foam, with a backing on it, so it flows smoothly through your sewing machine. Used for sewing channels. Roll size 1/4" thick x 60" wide x  25 yds. long.
Part Number
#569
#570		   Cost
 Per Yard $ 12.80 Retail
 Per Roll $ 257.50 Retail
     
Shredded Foam - A product used for filling cushions, throw pillows, inside backs, crafts, toys and many other uses. Comes in varying weight between 8 and 16 lbs.
Part Number
#256		   Cost
 Per Pound $ 3.00 Retail

Order Form

FOAM SAW


An American made, good quality foam saw. Comes with an 8" blade with stanchion. Has a 4 amp electric motor. Other blade lengths and motor amperages available through special order.
Part Number
#775		   Cost
 Each $ 504.00 Retail
  Replacement Blades
for foam saws.		  
Part Number
#1535		 Foam Queen Replacement Blades Cost
 Each $ 66.00 Retail
#1536 Accucutter Replacement Blades Each $ 66.00 Retail

FURNITURE COVERS

Clear poly covers. Great for storing and protecting furniture when transporting.
CHAIR SIZE - 42"
Part Number
#257
#258		 Cost
 Each $ 3.80 Retail
 Per 100 $ 169.20 Retail
   
SOFA SIZE - 100"
Part Number
#259
#260		 Cost
 Each $ 5.40 Retail
 Per 100 $ 242.00 Retail

Great Lakes Fabrics, Inc.

1904 S. Wenona St.  Bay City, Michigan 48706
1.800.652.2358 - North American Wats
989.893.3311 - Local & International
  989.893.5875 - Fax

Business Hours: Mon - Fri  8:00am to 5:30pm E.T.
 Or Contact Us Anytime

[Upholstery Fabrics] [Marine Canvas &  Supplies] [Vinyl Fabrics]
[Home Page] [Upholstery Supplies] [Secure Order Form]
[About Us] [Bulletin Board]