Upholstery Tools

Air Hose

AIR HOSE-COIL
1/4" x 25' coil type hose with swivel hose end.

Cost       

$ 73.50 Retail

AIR HOSE-STRAIGHT
1/4" x 50' poly hose

$ 128.70 Retail

Button Machine

BUTTON MACHINE
NO. 1 HANDY JR. Button Machine. A manually operated button covering and cutting machine. Used with Handy 2-piece dies and short cutter. A very durable and dependable machine.

Cost       

#108

Each $ 282.30 Retail

Button Dies

BUTTON DIES
Handy JR. three piece dies. Set includes short cutter.

Cost       

NO. 30 HEAVY - 3/4" diameter

NO. 36 HEAVY - 7/8" diameter

NO. 40 HEAVY - 1" diameter

Each $ 207.10 Retail

NO. 45 HEAVY - 1 1/8" diameter

Button Cutters

REPLACEMENT CUTTERS FOR DIES

Cost       

NO. 45  CUTTER ONLY

Other sizes available through special order.

Fastener Tools


Pres 'N Snap Tool - This tool is the most versatile tool for setting snaps and grommets. Ends the need for pre-punching holes before setting snaps. Comes complete with dies for four snap parts as well as dies for the #1 grommets. Replacement parts are in stock.

Cost       

Each $ 285.60 Retail

Replacement Dies For Pres 'N Snap Tool:

Part A Cap 

Each $ 44.70 Retail

Part B Socket 

Each $ 44.70 Retail

Part C Stud

Each $ 46.60 Retail

Part D Eyelet

Each $ 44.70 Retail

 
#1 Grommet Die Set (Top and Bottom)

Each $ 75.80 Retail

 
#2 Grommet Die Set (Top and Bottom)

Each $ 88.50 Retail

 
Gypsy Stud

Each $ 58.00 Retail

 
Rubber Retainer for Parts A and D

Each $ 4.50 Retail

 
Rubber O-Ring for Dies

Each $ 0.94 Retail

Economy Hand-Held Snap Tool - A hand held tool for setting snaps. Used with a hammer to pound the posts down. Bottom part of this tool is plastic. Does Not handle abuse well. A simple, helpful economical tool.

Per Set $ 20.70 Retail

Premium Hand-Held Snap Tool - A hand held tool for setting snaps. Used with a hammer to pound the posts down. Both parts of this tool are metal. High durability. A simple, helpful economical tool.

Per Set $ 52.60 Retail

Screw Stud Drill Adapter - Screw stud adapter for phillips head screws. Holds screw stud firmly in place, reduces slips. Eliminates pre-drilling in aluminum or fiberglass when used with our 1/2" stainless self tapping screw stud. Allen wrench and phillips bit included. 

 Three Piece Set $ 86.40 Retail

Quick-Fit Canvas Kit - A kit designed to help hold your canvas in place, while you continue fitting and marking out your adjustments. Acts as a third hand, using pins clipped to screw studs already existing on the boat or vehicle. Kit includes 50 sockets and 25 caps. A metal release tool is also included.

Per Kit $ 139.40 Retail

Replacement Quick Fit Caps:
Black Holding Cap(s) 1 - 99

$ 1.32 Retail

$ 0.80 Retail

$ 3.20 Retail

Sockets (with pins)  100+

$ 2.40 Retail

Quickfit Release Tool

Each $ 6.50 Retail

Foam Saw

An American made, good quality foam saw. Comes with an 8" blade with stanchion. Has a 4 amp electric motor. Other blade lengths and motor. amperages available through special order

Cost       

Each $ 504.00 Retail

 Replacement Blades for Foam Queen Brand Foam Saws

Each $ 66.00 Retail

Replacement Blades for Accu-Cutter Brand Foam Saws

 Each $ 66.00 Retail

Glue Gun
(SIPHON AIR GLUE SYSTEM)

K-GRIP GLUE GUN - Model #118. Custom made for the upholsterer, works on all air systems with pin-point control, no over spray. Siphon type external mix does not dry out or plug up during use. Replacement parts available.

Cost       

Per Each $ 117.60 Retail

K-GRIP GLUE GUN - REPLACEMENT PARTS
Center Tube

Each $ 15.00 Retail

Each $ 15.80 Retail

Each $  8.50 Retail

Plastic Jar

Each $  7.60 Retail

Each $  4.30 Retail

Each $ 13.70 Retail

Each $  4.50 Retail

Each $  3.20 Retail

Packing

Each $  1.70 Retail

Grommet Tools

Grommet Dies for plain style sheet metal grommets.
#1 - 9/32" Diameter hole size.

Cost       

Inserting Die $ 76.70 Retail

Hole Cutter $ 32.60 Retail

#4 - 1/2" Diameter hole size.

Upholstery Hammers

Hammer With Fancy Nail Tip - This hammer has a nylon tip on one end and a magnetic tip on the other. The nylon tip helps prevent damage to decorative nails. Head weight is 7 ounces. Replacement tips available. Osbourne #36.

Cost       

Each $ 70.50 Retail

Each $ 6.70 Retail

Hammer With Magnetic Tip - Solid bronze head, steel tipped at both ends, small tip has permanent alnico magnet. Head length 5 1/2 inches.
Head weight is 7 ounces.  Osbourne #33.

Each $ 64.90 Retail

Rawhide Mallet - The head of this light weight mallet is made entirely of rolled rawhide. The handle is white hickory hardwood. Head is 2 inches in diameter, 3 1/2 inches in length. This mallet weighs 10 ounces. Osbourne #196.

Each $ 83.80 Retail

Hog Ring Pliers (Bent) with Shielded Handles - These hog ring pliers are bent for reaching into tight places. Snout has grooves at the perfect depth for holding rings in place until you're ready to crimp.

Cost       

#454

Each $ 60.20 Retail

Hog Ring Pliers (Straight) with Shielded Handles - These hog ring pliers are the traditional straight design. Snout has grooves at the perfect depth for holding rings in place until you're ready to crimp.

#453

Each $ 55.70 Retail

Klinch-It Tool

KLINCH-IT TOOL
Fasten coil springs to webbing quickly and easily with this tool. Four to six clips hold the coil spring firmly in place.
How To Use This Tool

Cost       

#301

Each $ 442.50 Retail

#302

Per 500 (20 Strips) $ 64.00 Retail

#303

Per 5000 box $ 356.00 Retail

AUTO TRIMMERS AND UPHOLSTERERS COMBINATION KNIFE - Made of the finest steel with both hook and pointed blade. Used for ripping seams and cutting carpeting, vinyl plastic and rubber. Beechwood handle contoured to fit your hand. A handy professional tool.

Cost       

#457

Each $ 63.50 Retail

SQUARE POINT KNIFE - Trimmers and upholsterers knife, features a wood handle with a pinned blade that measures 5/8" wide by 3 7/8" inches long.

#458

Each $ 16.00 Retail

Complete Unit

A-M HOT CUTTER - This tool prevents fraying and untidy edges by heat sealing the canvas edge using heat to melt the canvas. The perfect tool for cutting nylon, dacron, acrylic fabrics and webbing. The three piece design is a money saving alternative to other knives being used. When the element burns out or the blade used up you can purchase replacement parts and not have to discard the complete tool.

#536

Each $ 153.80 Retail

#974

Each $ 47.40 Retail

#980

Each $ 75.10 Retail

#982

Each $ 49.40 Retail

Needles

Curved Needles - These needles have a round point and are used to hand sew or blind stitch cushions closed, where straight needles can't be used. Length is measured around the curve of the needle.
3" Curved Needle - Light - 18 gauge.

Cost       

Per Dozen $ 34.80 Retail

Per Dozen $ 38.40 Retail

Per Dozen $ 37.20 Retail

5" Curved Needle - Light - 16 gauge.

Per Dozen $ 43.20 Retail

Per Dozen $ 52.80 Retail

Straight Needles - These needles are used in the replacement of buttons amongst other upholstery applications. Available in 12" or 24" lengths, single or double square point.

12" Straight Needle - Single round point for sewing or button tufting.

Per Dozen $ 88.80 Retail

#334

Each $ 19.20 Retail

#335

Each $ 15.20 Retail

Per Dozen $ 150.00 Retail

Timesaver Tufting Needle - The very best in the trade. Thread clasp and inject it deep into the back or cushion from the front. When needle reaches maximum depth push plunger to inject clasp. Pull strings till taunt and tie button on the two exposed strings to required depth.

#459

Each $ 73.20 Retail

#460

100 Clasps $ 13.90 Retail

500 Clasps $ 46.50 Retail

Size 135x17/23 Thicker Gauge
Sewing Machine Needles - These needles are used on industrial sized sewing machines such as  Consew, Juki, Pfaff and more. Available in two thicknesses. Regular thickness for upholstery fabrics and a thinner gauge for sewing leather vinyl and canvas materials (makes smaller holes).

Each $ 2.20 Retail

Per Card of 10 $ 17.00 Retail

Per box of 100 $ 108.00 Retail

Size 135x17/20 Thinner Gauge

Each $ 2.20 Retail

Plyers

Diagonal cutters, dykes, side cuts... Whatever you call them, they are the best staple pulling tool available.

Cost       

Piping Tins

These 36" long piping tins are made of smooth aluminum. No burrs to catch on fabrics. The material is soft so tins can bend to different sizes. Will form diameters ranging between 2 and 4 inches. Only a single pair is needed instead of a separate set for each size.

Cost       

Pins


Upholsterers T-Pins - Osborne brand 2" Long.
Approximately 300 per  1/2 pound box.

Cost       

Per Dozen $ 2.00 Retail

Per Box $ 30.80 Retail

Upholstery Pins - Osborne brand Heavy Duty 3" Long. 16 gauge.

Per Dozen $ 10.10 Retail

Per Gross (144) Box $ 69.00 Retail

Twist Pins - For holding arm covers and head rests in place. Clear top.

Per Each $ 0.40 Retail

Quick Nailer


Quick Nailer
Quick Nailer - Fancy nail spacer for use with decorative nails. Holds nails singly or in a row of five. Set nails without damaging furniture or fingers.

Cost       

Per Each $ 14.40 Retail

RAZOR BLADES

Industrial double honed razor blades. Made in USA. 100 per box.

Cost       

Wiss TC-1 Thread Clip - Ideal for the seamstress. Positive action, self opening spring provides fast, clean cutting. Hot drop-forged of fine cutlery steel. Regular edge, sharp points and nickel plated. Overall length 4 5/8 inches. Length of cut 1 inch. Weight 2 1/2 ounces.

Cost       

Each $ 31.00 Retail

Wiss DS-1 Auto Body Shears - Hot drop-forged and inlaid. Nickel plated blades with chrome handles. Overall length 8 inches, length of cut 3 inches. Weight 7 ounces.

Each $ 64.40 Retail

Wiss #20 RH 10 Inch Shears - Professional and industrial strength made with bent handles for greatest ease of cutting and trimming. These larger sizes have powerful leverage and unequalled cutting capacity. Black handles with inlaid polished blades. Overall length 10 inches. Length of cut is 4 3/4 inches.
Weight 13 ounces.

Each $ 93.30 Retail

Wiss #20 LH 10 Inch Shears - Same as above only in left hand configuration.

Each $ 98.00 Retail

Wiss #22 RH 12 Inch Shears - Professional and industrial strength made with bent handles for greatest ease of cutting and trimming. These larger sizes have powerful leverage and unequalled cutting capacity. Black handles with inlaid polished blades. Overall length 12 inches. Length of cut is 6 1/8 inches.
Weight 18 ounces.

Each $ 80.40 Retail

Seam Rippers

Sewing  Seam Ripper  - Small. 2 1/2" overall length.
Plastic and metal construction.

Cost       

Each $ 2.40 Retail

Sewing  Seam Ripper  - Large. 4 1/2" overall length.
Plastic and metal construction.

Each $ 5.70 Retail

Each $ 10.00 Retail

Seam Stretcher

Sewing Seam Stretcher  - Osborne #267 - Made of light weight aluminum. Simple toggle clamp construction. Easy to operate. Minimum seam length 12". Maximum seam length 3 feet. Remains ridge when in use. Replaceable points! Just cut off one of our 3 inch upholstery pins. A quality long lasting tool.
 

Cost       

Each $ 145.10 Retail

Staple Guns

STAPLE GUNS
BeA AIR STAPLE GUN - This gun is sturdy yet light weight. Quieter than other guns, it uses less moving parts which in turn minimizes down time and gives years of trouble free service.

Cost       

Per Each $ 330.00 Retail

ELECTRIC STAPLE GUNS
ELECTRIC STAPLE GUN - This electric gun runs on 110 volts and can go anywhere there's electricity. Good for in home repairs. Not recommended for continuous use. Comes with carrying case. Weighs 3 pounds.
Duo-fast Model EIC-3118. Made in USA.

Per Each $ 630.00 Retail

Staple Pullers

Staple Lifter - The most popular staple puller we carry. Removes staples, tacks and shredded material. Largest head angle for extra lifting power and minimal knuckle scraping. Manufactured from top grade steel and electronically hardened working ends. Easy grip plastic handle. Osbourne #120 1/2.

Cost       

Each $ 37.70 Retail

Staple Lifter - Removes staples, tacks and shredded material. Lesser head angle for normal lifting power. Manufactured from top grade steel and electronically hardened working ends. Easy grip plastic handle. Osbourne #120.

Each $ 37.70 Retail

Tack Claw - This tack claw has a rugged plastic handle for heavier use and more leverage. Overall blade length is 2 1/2 inches, tool length is 6 inches.  Osbourne #202.

Each $ 36.60 Retail

Combination Tool - This tool is a combination ripping and tack pulling tool. Heavy duty plastic handle, made for hitting with hammer. Osbourne #402 1/2.

Each $ 28.50 Retail

Tack And Staple Remover - Forged steel tool with a wooden handle. Overall tool length is 6 1/2 inches. Osbourne #121.

Each $ 37.20 Retail

Staple Remover - A quality staple remover made of 4140 tempered steel alloy. Osbourne #124.

Each $ 29.50 Retail

Double Rock Staple Remover - Works well on flat surfaces and in tight places. Attacks staples on a 45% angle so they can be removed with a twist of the wrist.

Each $ 34.20 Retail

Ventilator Tool

Size #1 - 1/2" Vent Tool

Cost       

$ 24.00 Each Retail

Size #2 - 3/4" Vent Tool

$ 28.40 Each Retail