VENTS
Sew in style for canvas
- A triangular shaped domed plastic vent
for boats and other items that need venting. It features an open hole, with a
3/8" lip for sewing on to the canvas. Width is 5" x 4 3/4" Long x 1
1/2" Dome Height. Can be used with screen mesh to keep the bugs out.
|
| #857 |
Each
$ 4.30
Retail |
| #858 |
Each
when you buy 50+
$ 4.10
Retail |
|
Canvas
Support Vent - Supports canvas top
while circulating air below the canvas. Insert pole to lift canvas for
water run off. This product is sturdy, lightweight and installs easily.
Fits both 3/4" and 7/8" poles.
|
| #1014 |
1 - 24
$ 12.60 Retail
|
| #1024 |
25 - 49 $
11.90 Retail
|
| #1412 |
50+
$ 11.20 Retail
|
|
Solid Brass Ventilators
are
available in two sizes. To be used wherever you
want to "let the air out". Small quantities
can be attached without dies.
Boxed complete with washers.
|
|
SIZE #1 - 1/2" Hole Diameter |
|
| #480 |
Per
Dozen $ 8.40 Retail |
| #481 |
Per
Gross $ 62.40 Retail |
|
SIZE #2 - 3/4" Hole Diameter |
|
| #482 |
Per
Dozen $ 12.50 Retail |
| #483 |
Per
Gross $ 93.60 Retail |
|
VENT
TOOL
|
|
|
SIZE #1 - 1/2" Vent Tool |
|
|
#571
|
$
22.80 Each Retail |
|
SIZE #2 - 3/4" Vent Tool |
|
|
#988
|
$
27.00 Each Retail |
|
NYLON
FITTINGS
|
|
EYE
END - OUTSIDE - For 7/8"
tubing and 1/4" bolt. Set screw included. |
|
| #997 |
Each
$ 4.10 Retail |
|
JAW
SLIDES
- 7/8" with set screw. |
|
| #999 |
Each
$ 3.60 Retail |
|
DECK
HINGE - 90*
(Straight) with 1/4" bolt. |
|
| #1001 |
Each
$ 2.90 Retail |
|
DECK
HINGE
- Angle base with 1/4" bolt. |
|
| #1003 |
Each
$ 2.90 Retail |
|
STAINLESS
STEEL FITTINGS
|
|
EYE
END - OUTSIDE - For 7/8" tubing and 1/4" bolt. Set
screw included. |
|
| #971 |
Each
$ 9.00 Retail |
|
EYE
END - OUTSIDE - For 1" tubing and 1/4" bolt. Set
screw included. |
|
| #973 |
Each
$ 10.10 Retail |
|
JAW
SLIDES
- 7/8" with set screw |
|
| #979 |
Each
$ 10.00 Retail |
|
JAW
SLIDES
- 1" with set screw |
|
| #981 |
Each
$ 10.60 Retail |
|
EYE
STRAPS
- Nickel plated die cast. |
|
| #993 |
Each
$ 6.80 Retail |
|
DECK
HINGE -
90* (straight) with 1/4" bolt. |
|
| #983 |
Each
$ 10.50 Retail |
|
DECK
HINGE
- Angle base with 1/4" bolt. |
|
| #985 |
Each
$ 9.50 Retail |
|
CONCAVE
RAIL HINGE - Comes with 1/4" bolt, pre-drilled for 2 #10
screws. |
|
| #1021 |
Each
$ 10.40 Retail |
|
SIDE MOUNTED DECK
PLATE Comes with 1/4" bolt, pre-drilled for 2 #10
screws. |
|
| #1537 |
Each
$ 12.40 Retail |
|
QUICK
RELEASE PIN -
Stainless Steel
3/16" diameter |
|
| #987 |
Each
$ 3.84 Retail |
|
TWO LOOP LANYARD with tab |
|
| #989 |
Each
$ 4.30 Retail |
|
ADJUSTABLE
BUCKLE - For use with 1" Straps.
Stainless steel with depressed center bar. |
|
| #991 |
Each
$ 1.72
Retail |
| #992 |
Box
of 100 $
120.00
Retail |
|
PINCH BUCKLE - Made by YKK. For use with 1" Straps. Includes
both parts. Black only. |
|
| #574 |
Each
$ 1.26 Retail |
|
|
| D-RINGS AND SNAP HOOKS
An
economical method for fastening detachable cushions with a
strap. Both are nickel plated.
|
|
D-RINGS
- For 1/2" Wide Strap
|
|
| #191 |
Each
$
0.50 Retail |
| #192 |
Per
Dozen $
2.00 Retail |
|
SNAP
HOOKS - For 1/2" Wide Strap |
|
| #193 |
Each
$ 1.02 Retail |
| #194 |
Per
Dozen $
10.00 Retail |
|
D-RINGS
- For 1" Wide Strap Stainless Steel
|
|
#896 |
Each
$ 2.00 Retail |
#897 |
Per
Dozen $ 20.40 Retail |
|
SNAP
HOOKS - For 1" Wide Strap Stainless
Steel |
|
#898 |
Each
$ 3.92 Retail |
#899 |
Per
Dozen $ 30.00 Retail |
|
CARPET FASTENERS
Two part Military Black
ring-style fasteners that screw to the floor.
|
|
|
#1133 |
Each
$
3.04 Retail |
|
CURTAIN FASTENERS
|
|
|
SOCKET - CURTAIN
FASTENER - Standard Leg 7/32" |
|
#963 |
Each
$ 1.82 Retail |
#964 |
Per
100 $ 90.40 Retail |
|
BACK
PLATE - CURTAIN FASTENER |
|
|
#965 |
Each
$ 0.64
Retail |
|
#966 |
Per
100 $
33.00 Retail |
|
SCREW
STUD - CURTAIN FASTENER |
|
|
#1012 |
Each
$ 2.10 Retail |
|
#1013 |
Per
100 $
105.70 Retail |
|
TELESCOPING MOORING POLE
Made of anodized
aluminum. One pole which has both tips styles on it. Flip the top of the
pole for either grommet style head or flip it
again for the snap style head.
|
|
|
2 in 1
STYLE - Extends to 70" |
|
|
#1009 |
Each
$
20.50 Retail |
|
#1010 |
(Case
of 25 Each Price) $
16.50 Retail |
|
STAINLESS STEEL TUBING
7/8" Stainless Tubing .065 thick wall - 24 ft. length. Full length sticks shippable by
truck only. We will cut lengths for you, but you will purchase and be sent the entire 24 ft. length. Each cut is $ 2.00.
Maximum UPS-able length is 108"
|
|
#1017 |
1-9 Sticks (Priced per
Each) $ 150.00
Retail |
#1018 |
10+ Sticks (Priced per
Each) $ 140.00
Retail |
|
1" Stainless Tubing .065 thick wall - 24 ft. length. Full length sticks shippable by
truck only. We will cut lengths for you, but you will purchase and be sent the entire 24 ft. length.
Each cut is $ 2.00.
Maximum UPS-able length is 108"
|
|
#1019 |
1-9 Sticks (Priced per
Each) $ 163.60
Retail |
#1020 |
10+ Sticks (Priced per
Each) $ 153.40
Retail |
